Skip to main content
1041 Business Blvd Watkinsville, GA 30677     |     Rug Drop-Off Locations

Tips and Hacks About Deep Cleaning Your Bathroom Tiles



Tips and Hacks About Deep Cleaning Your Bathroom Tiles

Many consider bathroom tiles a picturesque addition to your bathroom – they complement your bathroom accessories and set the overall tone. Tiles can give the bathroom the type of look you’re looking for – from trendy and modern to a more homey atmosphere. However, regardless of the tile design, you will need to maintain them clean and shiny to keep that vibe alive.

Maintaining and cleaning bathroom tiles is not a job to look forward to. But there are ways to get rid of hard-to-remove stains and dirt in a simpler way, and even ways to minimize mold, mildew, or hard water stains from accumulating on your bathroom tiles.

This task doesn’t have to be a dreaded chore; let’s check out some tips on how to clean bathroom floor tiles and make the space moisture-free and sparkling in no time.

How to Clean Different Tile Types

Before you begin cleaning your bathroom tiles, you need to know the type of tiles you have. They can be ceramic, porcelain, marble, terra cotta, or other natural stone tiles.

Any type of all-purpose cleaner, vinegar, or dish soap can be used for ceramic and porcelain tiles because they will not scratch or lose their shine. Marble, granite, or slate tiles are more sensitive, thus, scratch easily, so use a soft-bristled broom to sweep the dirt.

Avoid discoloration in granite tiles by using mild detergents that are pH-neutral. Marble, terra cotta, and slate don’t handle acidic cleaners, so avoid vinegar or ammonia when cleaning them.

Cleaning Your Bathroom Floor Tiles

The lifespan of floor tiles mainly depends on the type of tiles you choose. Ceramic and porcelain tiles have no expiration date if cared for and maintained properly. Other materials may have a shorter lifespan but will still last longer if cared for.

Regardless of the tile material, tiles need to be dry-cleaned at least twice a week. This means vacuuming or sweeping the gritty debris piling on the tile floor, while the so-called wet cleaning is recommended to be done every week.

So how to clean bathroom floor tiles? First, gather the tools and materials you’ll need, and then you can roll up your sleeves and get to work.

Start With Dry Cleaning Your Tiles

Use a vacuum, duster, or broom and dustpan to collect debris and dirt from the floor. Don’t forget to get into the corners where dirt likes to hide and remove it all.

Do this regularly to avoid piling up debris on the tile floor. It is often difficult to notice the grime buildup, which is why it’s recommended that you carry out the wet cleaning once a week to keep the tiles clean.

Prepare the Cleaning Solution

How to deep clean bathroom tiles? Simply use any type of cleaner that will not damage the tiles. You can use dish soap, vinegar, or other all-purpose cleaners.

Vinegar and baking soda are the most cost-effective way to clean. But be careful not to use them on marble, granite, and natural stone tiles. If you go for other cleaners, simply prepare the solution you’ll be using with warm water.

Apply Wet Cleaning

Combine vinegar and baking soda in a paste that you’ll apply to the tiles. Let it sit for a while to break down soap scum or limestone and then rinse it off.

If you are using other cleaners, dip a rag or chamois mop in the solution and squeeze out the excess water. Mop the tile floor and cover every inch to make sure that you have cleaned it thoroughly.

Be sure to rinse the mop and change the dirty water in the bucket frequently to avoid leaving a hazy grime film on the tiles. You can do one final finish mopping with hot water and vinegar to get rid of any persistent haze.

Clean the Grout

The grout can collect a lot of dirt and debris, so you will need to pay attention to keeping those areas clean as well. To clean the grout, start by preparing a bleach solution or use any cleaner made particularly for grout cleaning. Spray the solution, let it sit for a few moments, and then rinse it off well.

Work Towards the Door

When cleaning the floor, start from the area farthest from the door and work your way back toward the door. This way, you won’t be stepping on the areas you just cleaned, leaving footprints that will result in having to clean the area again. Pay attention to corners and edges, which are usually the dirtiest areas.

Finish With Drying the Floor

Use a clean, dry cloth and pass it over the floor you just cleaned. This will remove any water spots that are left behind.

Cleaning Your Bathroom Shower and Wall Tiles

If you are wondering how to clean wall tiles in bathroom, know that it is not that different than the tiles on the floor. Start by choosing the cleaner that you’ll be using. Be sure you are using one recommended for the tile type to avoid damaging them.

Since bathroom tiles undergo more wear and tear than other tiles, it is crucial to learn how to clean bathroom shower tiles. Using different soaps and running water leads to serious limestone and soap scum build-ups.

Prepare the Cleaning Solution

Many options can be used for cleaning – from vinegar and baking soda mixture to chlorine bleach or any other cleaner recommended for your tiles. You can also mix dishwashing soap with warm water for regular cleaning.

Spray the Tiles

To reach every part of your wall tiles, put the solution in a spray bottle and evenly spray it on the bathroom tiles. If you are using vinegar and baking soda paste, apply it evenly on the tiles starting from the top and working downwards.

Let the selected cleaner sit for about 30 minutes, or as recommended by the manufacturer, to break down the soap scum or hard water that has built up on the walls.

Do Some Good Scrubbing

Spraying the tiles with a solution will not always do the trick – sometimes, you might need to do some good scrubbing. Use a sturdy brush and remove any buildup on the grout and tiles. Start from the top and work your way down.

Rinse Well

Once you have gotten to all the buildups, rinse the tiles thoroughly to avoid any of the solutions staying behind. Use warm water to ease the dirt removal, and rinse until the water runs clean.

Check to see if you have managed to remove everything. If you are not satisfied with the result, you can always repeat the process.

Dry the Tiles

Use a dry cloth to remove any wet spots that can cause mold and mildew.

Certified Clean Care: Your Partner in Keeping Bathroom Tiles Crisp Clean

Do you want to know the easiest way how to clean bathroom tiles? Certified Clean Care is at your service!

We offer residential and commercial detailed cleaning services. Commercial floor areas can get rather dirty due to the constant foot traffic, which can result in potential health hazards. We’ll clean those tiles and grout from debris that has been piling up or remove any stains from your wood floors in no time!

Do your carpets and upholstery need some deep cleaning? Don’t worry; simply contact us, and we’ll have the job done to your satisfaction. Choose Georgia’s certified and most trusted cleaning provider for all your cleaning and disinfection needs.

FAQ

How do you deep clean a bathroom floor?

Begin by vacuuming the dirt from the floor and pay special attention to the corners where dirt tends to hide. Then prepare a cleaning solution by using a cleaner of your choice or as recommended for the floor type.

Apply the prepared solution on the floor, let it sit for some time to start working, and then rinse thoroughly. Finish with a clean, dry cloth to collect any excess water left behind. You can also use a steamer to deep clean your bathroom.

What should I clean the bathroom tile with?

There are many available options to clean the tiles. Baking soda is inexpensive, gentle on the environment, and very effective. Mix it with vinegar to get a paste, and your tiles will be shining in no time.

Solely using vinegar is also effective for cleaning because of its acetic acid content. However, be careful with the use of vinegar on cement grout as it can do two things – clean the cement grout and, at the same time, dissolve it.

How do you make bathroom tiles look new?

Regular cleaning and maintenance of bathroom tiles will keep them looking new and expand their lifespan. If you clean them each week, you won’t allow those persistent and annoying stains to get comfortable in the bathroom.

Make sure that you first know what type of tiles you have. After that, you can use the right cleaner, as the tile manufacturer recommends, to avoid scratching or damaging the tiles.